5 questions on "Managing Distribution of Multicast with IGMP - IGMPv2 Timers"
IGMPv1 10 sec;
IGMPv2 can be between 0,1 and 25,5 sec (default 10 sec)
IGMPv3 can be between 0,1 and 53 minutes (default 10 sec)
IGMPv1 180 sec
A time period during, if a router does not recieve an IGMP report, the router concludes that there are no more members of the group on the subnet
A time period during which, if the IGMPv2 nonquerier routers do not recieve an IGMP Querier from the querier router, the nonquerier routers conclude that the querier is dead
Two times Query interval (125 sec) + half default Query Response Interval (10 sec)
IGMPv2 125 * 2 + 10 *1/2 = 255 sec
The maximum response time inserted by IGMPv2 router into the Group-Specific Queries and the time period between two consecutive Group-Specific Queries sent for the same group.
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti/command/imc-cr-book/imc_i1.html#wp7102223740
A time period during, if an IGMPv2 host does not recieve an IGMPv1 Query, the IGMPv2 host concludes that there are no IGMPv1 routers present and starts sending IGMPv2 messages.
- A unique study and practice tool
- Never study anything twice again
- Get the grades you hope for
- 100% sure, 100% understanding

- Higher grades + faster learning
- Never study anything twice
- 100% sure, 100% understanding